Below is a list of the equipment that I am currently using. If you want any more information or help, please contact me.
Camera/s
- Nikon DSLR D300 12.1mp (Info)
- Sony Compact DSC-W200 12.0 mp
Housing
- Ikelite (6812.3) rated to 60m (Info)
- Sony Marine Pack (mpk-wb) rated to 40m
Lenses
- Nikon 60mm Macro D
- Tokina 10-17mm AT-X 107 AF DX
- Tamron B003 18-270Di II VC LD (F/3.5 - 6.3)
- Tamron 28-200
Strobe/s
- Ikelite DS-125 (Info)
- Ikelite DS-160 (Info)
- Nikon SB-600
- Nikon SB-900
Arm/s
- 2 x Ikelite Ball Socket Arm system 4086.61 (Info)
Ports / Bodies
- Ikelite 8” Dome 5510.45 (Info)
- Ikelite 8” Dome Port Body 5510.10
- Ikelite Flat Port 5502.41 (Info)
Cables
- Ikelite Single Digital TTL Sync Cable 4103.51
- Ikelite Duel Sync Cable 4103.52 (Info)
Filters
- Sony VF-MP5K marine filter (red)
Regs
- Cressi Sub - Ellipse Titanium (info)
Computer
- Uwatec Galelao Sol (Info)
Dive Logs
- I use SmartTrak to log all my dives from the SOL (Info)
BC
- Cressi Sub - Aero Pro - Support twin tanks (Info)
Fins
- Cressi Sub - Master frog Fins (Info)
Suit/s
- Seatec - Custom Size - Dry Suit Magnum EX (Info)
- Seatec - Custom Size - One Piece Mariner (Info)
Tanks
- 4 x 12lt Faber Steel Tanks (Info)
- Bailout / Pony Tank - Catalina S19 cu/ft 2.7lt (Info)
Underwater GPS
-
I have developed my own underwater GPS system that I use to mark locations of fish and or eggs when I do underwater survey dives. I have a colour Garmin GPS unit in an Ikelite blank housing. I have added 4 lots of Ikelite control knobs into the housing, and also a 
bulkhead fitting that seals the cable connection. The cable runs to the surface where the antenna sits on a float. The antenna is a powered amplifier type, and if the cable is kept tight under water, floats directly above the diver. Accuracy appears to be around 4-6m at the moment, which is fine to follow previous dived paths and find waypoint and marking as well. I have loaded the Garmin software and purchased the marine maps, including tide info and depths. The eho;e lot is then attached to my camera, so I can also take pictures and refernece the Camera Image Date Time stamp to get the picture location. I then use the time to reference the depth on my dive profile to also add the depth to the image. For more info, please drop me an email via the conatct page. Click on the image for a larger view...